-
- 0
No Cart Items.
1-PPS047(1)
LUBI Circulatory pump 120 Watts LPD-90
- Comes with the advantage of single point pressure improvement.
- Convenience of automatic flow operation.
- Hot Water Application
- Noiseless Operation
- Mode Selection
- Brass Suction &Delivery Connector
- Speed Selection Provision
- Rated voltage: 220V | Voltage range: 180V-260V (1PH)
- Rated Frequency: 50Hz
- Max. Discharge : Up to 24LPM
- 1 year warranty
1-PPS046(1)
CRI Pressure Booster Pump 1 HP (Dora series)
- CRI Pressure Booster Pump is uniquely designed to manage constant pressure and water flow through out the system. It STARTS the pump automatically whenever there is a pressure drop in the pipe line and STOP the pump automatically whenever it reaches maximum preset level of pressure in the pipe line. So it makes the entire system effective and efficient. In-built check valve & integrated system protect the pump from back flow of water & dry running which enhance the life span of the pump.
1-PPS045(1)
CRI Pressure Booster Pump 1 HP (Elsa series)
- CRI Pressure Booster Pump is uniquely designed to manage constant pressure and water flow through out the system. It STARTS the pump automatically whenever there is a pressure drop in the pipe line and STOP the pump automatically whenever it reaches maximum preset level of pressure in the pipe line. So it makes the entire system effective and efficient. In-built check valve & integrated system protect the pump from back flow of water & dry running which enhance the life span of the pump.
1-PPS043(1)
Submersible blue bend with stainer 1 1/2″ X 2nos
- Submersible blue bend with stainer 1 1/2″ X 2nos
1-PPS042(1)
CRI Automatic pump controller CPH-15 (for pressure pump)
- CRI Automatic pump controller CPH-15 (for pressure pump)
- pipe size
- 25 mm
1-PPS041(1)
Hose collar bend for monoblock priming purpose 1″threadx3/4″threadx27od collar for 1″ green flexible
- Hose collar bend for monoblock priming purpose 1″threadx3/4″threadx27od collar for 1″ green flexible
1-PPS040(1)
Pressure pump accessories (DANFOSS pressure switch, Pressure gauge and 5 way connector)
- Pressure pump accessories (DANFOSS pressure switch, Pressure gauge and 5 way connector)
1-PPS039(1)
Pressure pump NRV brass (with 1 side Female thread & 1 side male thread) (specialy for pressure pump and pressure pump bypass connection)
- Pressure pump NRV brass (with 1 side Female thread & 1 side male thread) (specialy for pressure pump and pressure pump bypass connection)
1-PPS037(1)
CRI Motor Starter DOL ((9-14) A, SINGLE PHASE)
- CRI Motor Starter DOL ((9-14) A, SINGLE PHASE)
- Accessories & Spares, CRI PUMPS, Starter and panels
1-PSS035(1)
Crompton Monoblock pumpset 0.5 HP 21mtrs Head (MAD052(1PH)Y-21+)
- AC Single phase, Centrifugal Monoblock Pumps, CROMPTON
1-PPS034(1)
LUBI Monoblock Pumpset 0.5 HP (MDH-12H) 22mtr Head
- The laminations are non-oriented silicon steel & confirms to IS-648. Volute, Impeller, Adaptor, Stator body, Endshield shall be made of close grained cast iron of high tensile strength and has a very smooth surface finish resulting in low friction losses.
- Motor windings shall be vacuum impregnated with synthetic varnish for better moisture resistance.
- Superior mechanical shaft seal for longer life and effective sealing against water leakage. The electric rotor is pressure die cast & uses electric grade aluminium. Grease Lubricated anti-friction ball bearings shall be fitted at both ends to withstand radial and axial loads.
- They are precisely machined on modern machine tools to give you years of reliable operation.
- Better insulating materials are used so that pumpset can with stand high temperature rise.
1-PPS033(1)
Lubi Mini Monoblock Pumpset 0.5 HP
- AC Single phase, LUBI, Mini Monoblock Pumps
- Pump casing, Adapter, Endshields are made of close grained cast iron of high tensile strength.
- Forged Brass Impeller is used to give trouble free service.
- Motor windings are vacuum impregnated with synthetic varnish for better moisture resistance.
- Superior Mechanical Seal for longer life and effective sealing against water leakage.
- Aluminium Extruded Motor Body for better heat dissipation and Corrosion resistant.
- Double Shielded pre-lubricated anti-friction ball bearings are fitted at both ends to withstand radial and axial loads.
- Better insulating materials shall be used so that pumpset can withstand high temperature rise.
- Self-Priming up to 6.0 meters at mean sea level.
- Fitted with Thermal Overload Protector (TOP).
- Totally Enclosed Fan Cooled (TEFC) construction resists dust, moisture.
- Light weight, Easy maintenance and spares availability
1-PPS032(1)
CRI Mini Monoblock Pumpset 0.5 HP (Dora series)
- AC Single phase, CRI PUMPS, Mini Monoblock Pumps
- CRI Self priming mini monoblock pumps are power driven by totally enclosed fan cooled AC induction two pole motor, suitable for continuous duty. Motor stator is made of low watt loss silicon laminations assembled under pressure and rigidly locked in the frame. The windings are of high grade enameled copper wire and are varnish impregnated. Construction of motor frames and usage of quality materials result in high performance, noise free operation and low temperature rise thereby increasing the life cycle of the motor. The mini pumps volute chamber and impellers are designed to give the best possible hydraulic efficiency and suction lift characteristics. Non-self priming pumps with end suction and radial delivery.
1-PPS031(1)
Kirloskar Mini monoblock pumpset 1HP Anisa-I
- Maximum head
- 24
- pipe size
- 25 mm
- HP 1 HP suction pipe size
- 25 mm
- AC Single phase, KIRLOSKAR, Mini Monoblock Pumps
1-PPS030(1)
Crompton Mini Monoblock pumpset 0.5 HP 21mtrs Head
- AC Single phase, CROMPTON, Mini Monoblock Pumps
- Crompton Mini Monoblock pumpset 0.5 HP 21mtrs Head
1-PPS029(1)
Asian Pumps & Machineries Hot & Cold Automatic Self Priming Silent Water Boosting Pressure Pump For Bathroom, Tap, Shower, And Washing Machine 120w (2 points equal pressure
- AC Single phase, FLOJOY, Pressure Booster Pumps
- Asian Pumps & Machineries Hot & Cold Automatic Self Priming Silent Water Boosting Pressure Pump For Bathroom, Tap, Shower, And Washing Machine 120w (2 points equal pressure
1-PPS028(1)
Asian Pumps & Machineries 1hp Self Priming Water Pressure Booster Pump with Dry Run Protection & Flow Sensing System for 5-6 Points at a Time Equal Pressure 220V
- : AC Single phase, FLOJOY, Pressure Booster Pumps
- Asian Pumps & Machineries 1hp Self Priming Water Pressure Booster Pump with Dry Run Protection & Flow Sensing System for 5-6 Points at a Time Equal Pressure 220V
1-PSS027(1)
Kisankraft Kk-Wpp-15 Petro Engine Centrifugal Water Pump (1.5 hp)
- KISANKRAFT, Petrol engine pump
- Kisankraft Kk-Wpp-15 Petro Engine Centrifugal Water Pump (1.5 hp)
1-PPS026(1)
Husqvarna W80P Centrifugal Water Pump (5.6 hp)
- Husqvarna W80P Centrifugal Water Pump (5.6 hp)
1-PPS025(1)
Husqvarna 2 stroke petrol engine pump 1X1 32mtr head
- Husqvarna 2 stroke petrol engine pump 1X1 32mtr head
1-PPS0024(1)
CRI Pressure Booster Pump 1 HP (Steelix series)
- Description
- CRI Pressure Booster Pump is uniquely designed to manage constant pressure and water flow through out the system. It STARTS the pump automatically whenever there is a pressure drop in the pipe line and STOP the pump automatically whenever it reaches maximum preset level of pressure in the pipe line. So it makes the entire system effective and efficient. In-built check valve & integrated system protect the pump from back flow of water & dry running which enhance the life span of the pump.
1-PPS0023(1)
CRI Pressure booster pump Brisk with 24 ltr tank 0.5 HP with float switch
- C.R.I. The pressure Booster system has a complete combo package for water pressure boosting and it is precisely designed for hassle-free performance. The booster pumps are designed in such a way that whenever pressure drops/attains to the desired level, the pump will start/stop automatically.
- A booster pump is designed to operate at high pressure. It has an impeller insider that improves the water flow and pressure. The movement of water, entering through the inlet and passing out of the outlet is brought about by an impeller. A tank present helps to build the water pressure. The impeller is spun by an electric motor. A water booster pump provides the pressure required to move water from a storage tank
- Available Sizes: HP 0.5 HP pipe size 25 mm
PPS0022(0)
LUBI Pressure booster pump with 1ltr tank 0.5 HP Mega booster-II
- Description
- Single-phase Water Pump
- In-built Thermal Over Load Protector
- Power Rating: 0.75 kw
- HP: 1.0
- Power Supply: 220V/1PH/50HZ/AC
- Available Sizes: HP 0.5 HP pipe size 25 mm suction pipe size 25 mm
PPS0012(0)
LUBI Openwell Vertical & Horizontal submersible pump 1.5 HP LHMS-115/9 (65 head) (1.25″ delivery)
- Description
- LHMS series pumpsets which can be installed both vertically and horizontally.
- LHMS Openwell Multistage Submersible Pumpsets offer the convenience of high head applications
1-PPS0021(1)
compressor pump CRI Borewell Mono Compressor 1 HP MC-2 400ft
- Categories: AC Single phase, Compressor pumps, CRI PUMPS, Pumpset
- Available Sizes: HP 1 HP pipe size 25 mm
1-PPS0020(1)
Kirloskar pressure booster pump 0.5 hp with CRI pump controller (CHOTTU)
- Description
- Automatic ON and OFF Operation
- Noiseless operation & Low power consumption
- CRI pump controller is provided for dry run protection and auto on and off
- Available Sizes: pipe size 25 mm HP 0.5 HP suction pipe size 25 mm
1-PPS0019(1)
SHAKTI Borewell submersible pumpset 2HP 170mtrs head water cooling without panel board
- Categories: AC Single phase, Borewell Submersible (water cool), Borewell Submersible Pumps, Pumpset, SHAKTI
1-PPS0018(1)
Crompton Borewell submbersible pump 1 HP 21stage oil cooling (111mtrs head) with panel board
- Categories: AC Single phase, Borewell Submersible (oil cool), Borewell Submersible Pumps, CROMPTON, Pumpset
